Skip to content

Surface Treatment

Abrasive blasting, UHP water jetting, coatings, linings and composite repair that extend asset life against corrosion.

Traditional abrasive techniques

Traditional abrasive techniques

Altrad Services uses traditional abrasive blasting techniques (dry or wet, centrifugal or compressed air projected, manual or automatic) to properly prepare targeted surfaces, which is necessary for the correct adhesion of any coating system.

These techniques require the use of a blasting media projected at high speed against the surfaces requiring preparation. This ensures the correct surface cleanliness and roughness, two key parameters for the application of protective coatings.

Depending on the localisation of the asset requiring treatment, prevailing environmental conditions, the state of the substrate (new or already coated) and the nature of the substrate (steel, stainless steel, concrete), Altrad Services will select the most suitable abrasive (metallic or mineral) and the most effective equipment (manual or automatic) to ensure the most efficient projection.

For obvious environmental reasons, we organise our activities to collect and recycle the abrasive particles.

Ultra-High Pressure (U.H.P.) water jetting

Ultra-High Pressure (U.H.P.) water jetting

Altrad Services has heavily invested in R&D to develop Ultra High Pressure water jetting techniques to prepare surfaces. This consists of jetting water at pressures of up to 3,800 bars. Our expertise in the use of this technology is nowadays so well recognised that we are a certified training body for U.H.P. operators.

Altrad Services has developed ultra-compact and high-performance equipment designed to provide a better quality treated surface (especially on concrete). In addition, our U.H.P. machines can be equipped with an aspiration system that eases the waste treatment and minimises the water requirement by recycling it.


Specifically, for surface preparation in nuclear power generation facilities, we also have a number of dedicated U.H.P. cleaning units which have been “nuclearised” so that they can be used in controlled areas (enabling the equipment to be moved from site to site using trans-nuclear containers approved for the transportation of materials used in certain controlled zones).


Our U.H.P. solutions come with major benefits such as: waste reduction and improved waste management, superior working conditions and increased safety through the use of robots and automation systems.

Permanent surface treatment workshop

Permanent surface treatment workshop

All over the world, Altrad Services possesses dedicated permanent workshops for surface preparation (blast room) and coating application (paint tunnel). When required, blasting equipment and facilities are also set up and used on our customers' sites, closer to their specific needs.

All our surface preparation workshops have been designed to serve our clients with efficiency and adaptability. They offer a wide range of advantages:

  • Climate controlled environment, which leads to predictable and repeatable results
  • High productivity ratio: our workshops reduce on-site hours and production is not dependent on weather conditions, enabling us to improve delivery lead-times
  • Superior surface preparation and high quality work
  • Adaptability to detailed clients’ requirements & specifications: capacity to absorb large-sized structures if necessary through modular working areas
  • Low environmental impact: our workshops are designed in full compliance with strict environmental regulations for surface preparation and coating activities.
Anticorrosion coating

Anticorrosion coating

Today, Altrad Services is an expert in the field of high-quality corrosion protection, possessing an exhaustive knowledge of all types of coating systems and application methods.

Whatever the environment, we ensure the expert application of chosen coating systems, extending the life of our clients’ most valuable assets. The enviable breath of our experience means that we intervene in the design, construction, commissioning and operational phases of an asset’s lifecycle.

We systematically use state-of-the-art application materials/equipment and high technology anticorrosion coating systems, delaying the formation of rust on steel structures.

Through our ACQPA membership, we ensure coating application quality and continuously evaluate our operators. All of our production and quality control teams contain a high ratio of certified personnel (operatives who are either ACQPA, FROSIO or NACE certified).

Concrete coating

Concrete coating

Altrad Services undertakes the repair and reinforcement of concrete structures through the combination of the most suitable surface preparation techniques and the expert application of the specified protective coating/repair systems.

Surface preparation of concrete is fundamental to the determination of how successfully it will be protected from degradation during its lifecycle; high quality surface preparation ensures that nothing will interfere with the adhesion of the selected protective coating or repair system. Altrad Services uses a wide range of surface preparation methods selected according to original concrete conditions and the type of protective coating system or repair material to be applied.

Our protective coating solutions use reliable products and proven application techniques that have an extensive-track record of concrete protection, from decorative thin film, through self-levelling toppings, to waterproofing polymer overlays.

For a wide range of concrete storage situations, our approach provides benefits such as resistance to a broad range of chemicals, abrasion and corrosion protection, structural strengthening and the protection against water & liquids ingress/egress.

Thermal spray coating

Thermal spray coating

Altrad Services is an expert in the application of Thermal Spray Coating (TSC), from pure aluminium (TSA), or zinc, to the application of specific alloys for various projects, ranging from the coating of small, specific devices to large surfaces.

TSC is a coating solution that uses particles of pure metal or metal alloy, which are melted and cumulatively deposited on top of each other, layer by layer, as they strike the surface being treated. Several methods of application are available: usual, arc-spraying and flame-spraying, or more highly specialised methods, such as high velocity oxy-fuel (HVOF).


TSC provides a wide range of benefits:

  • Long lifetimes with limited need for maintenance
  • Superior adhesion
  • The coating has a sacrificial anode effect on steel, which means the coating will corrode in preference to the steel substrate
  • Resistance to mechanical damage
  • Wide range of operating temperatures: from -45°C to 538°C
  • No drying/curing times after application
  • The application process can be mechanised
  • No health hazard from solvents or other organic substances.
Applications for the built environment

Applications for the built environment

Applications for the Built Environment

Altrad Services also provides traditional painting activities dedicated to the built environment, through the application of paint on floors and indoor / outdoor wall structures.

Our industrial floor painting services can help to overcome problems including irregular or slippery surfaces, poor hygiene, chemical damage, impact and abrasion of surfaces and dust control, and include epoxy floor coatings, decorative finishes, anti-slip and anti-static coating, safety marking, etc.

Special tank lining

Special tank lining

Special tank-lining

Internal surfaces of tanks come in contact with a wide range of substances, from drinkable water to highly concentrated chemical products.

This contact can induce severe corrosion of the tank and / or contamination of the stored product. We are able, in conjunction with lining manufacturers, to select and expertly apply the most suitable tank lining systems, according to the product stored and the operating conditions.

Composite repair systems

Composite repair systems

When it comes to repairing damaged parts of a pipework, Altrad Services can implement traditional techniques such as section removal or classic reinforcement, but our teams also have the ability to apply composite repair systems.

We use a composite wrap system made of resin and fibres for pipe strengthening. It can be applied in many configurations on several types of substrates (carbon steel / stainless steel / composite, straight pipelines and also fittings - flanges, elbows, reduction, T-pieces) and a variety of assets (caissons, storage tanks, vessels…).


The products we use are certified according to the ISO 24817 qualification standard. These ready-to-use systems do not require prior preparation within a workshop; our operators can quickly apply them while the asset is in operation and they significantly improve the performance and durability of damaged/corroded assets.

Localised induction heating

Localised induction heating

Altrad Services possesses a thorough knowledge of induction heating, a proven and reliable technology, which can be used to quickly remove existing coatings (incl. fireproofing systems) from steel surfaces..

Induction heating relies on a generator that sends alternating currents through an induction coil, which generates an electromagnetic field over the surface to be treated. Within the targeted conductive material (made of steel), the currents are converted into heat below the old coating, resulting in a rapid and clean separation and removal. This system easily strips away any thick existing coating system.

Induction heating can rapidly remove old and/or polluted coatings. It does not use abrasive or high-pressure water systems, which makes it ideal for specific projects with, for example, a compressed programme, such as railway bridges. It is safe, clean and environmentally friendly, as it does not create any secondary waste or dust.

Concrete impermeability

Concrete impermeability

Altrad Services is able to give permeable properties to any interior and exterior floor in all types of industrial facilities to ensure their retention properties.

To make surfaces impermeable and to protect them from external wear and tear, our expert teams are qualified to apply any of the following technical linings:

  • Hot sprayable flexible membranes (polyuria or polyurethane), which are efficient and highly flexible (crack bridging and weather resistant), with an extremely short curing period (just a few minutes)
  • Cold applied solvent free reinforced epoxy, which is highly mechanical & chemical resistant
  • Flexible manufactured membranes that can be seamed on site and that are suitable for ageing or friable substrates.

Our engineers always select the most environmentally friendly solutions: our goal is to be always in compliance with the most exacting sanitary and toxicological regulations: in this respect, we minimise the use of CMR-labelled substances and avoid VOC contents.

Need this on your asset?

Tell us about the scope, location and schedule and our operations team will come back to you.

Contact our team

Other services

Latest news

Follow us on LinkedInAll news